Sequel E5000-UV NAT fractional melt flow, high flexural modulus thermoplastic polyolefin (TPO) is typically used for profile extrusion applications that require low-temperature toughness and dimensional stability.
Sequel E5000-UV NAT
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 1.0 g/10 min |
| Density (23 °C) | 1.16 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 3100 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 25 MPa |
| Notched Izod Impact Strength (23 °C) | 40 kJ/m² |
| Notched Izod Impact Strength (-30 °C) | 5 kJ/m² |
Technical Data Sheet
Technical Data SheetProcess
Sheet and Profile Extrusion
Resin
Polypropylene Compounds
Applications
Industrial, Panels & Profiles
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications